Automotive Manual PDF

RSS Feed

The Resources for Automotive

1999-2007 Ford F250 / F350 Front Bumper Replacement Installation Instructions

March 23rd, 2009 · No Comments

1) Remove 4 bolts beside tow hooks to remove factory bumper. Retain bolts and tow hooks for use in step 7. ( see figure 1)
2) Remove fog lights from factory bumper keeping plastic pins and adjusting screw assembly in tact for future installation.
3) Remove casing from factory fog lights and discard. Install fog lights to brackets located on backside of new bumper using hardware removed in step 2.
4) Lift bumper and align with truck frame and secure with (4) ½”x 2” bolts provided through the tow hook cutout . ( see figure 3)
5) Install bumper support bracket provided to the backside of bumper mounting plate with (4) ½” x 2” bolts provided.
6) Adjust bumper and tighten all bolts with 75 lbs of torque.
7) Attach J bracket provided to bumper support bracket installed in step 5 using (1) ½’ x 2” bolt provided. Attach the other end of the bracket to the truck chassis using (1) ½” x 2” bolt provided. Tighten bolts with 75 lbs of torque. ( see figure 5)
8) Install tow hook removed in step 2 with original hardware. Plug in wiring harness to fog lights. ( see figure 6)

Get pdf 1999-2007 Ford F250 / F350 Front Bumper Replacement Installation Instructions

Related Entries


Related Tags: , , , , , , , , , , , , , , , , , , ,


Related Keyword: mnual on how to replace front bumper on 2008 ford f-150, 1999 Ford F-250 Brake Line Diagram, 1999 F250 Brake Line Schematic, diagramof frontaxle bearing at wheels of a 1999 ford f350, engine repair manual 1999 ford v10

0 comments for this entry ↓

  • There are no comments yet for this entry.

You must log in to post a comment.