Automotive Manual PDF

Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body intake cover.
3. Remove air intake hose assembly.
4. Remove (4) bolts from the throttle body.
5. Remove throttle linkage bracket and save screws. (Ref. “B” & “C”)
6. Install power plate with (2) “O”rings in place using (4) lag screws & (4) 1/4” washers. (Ref. “A”)
7. Install throttle linkage bracket using linkage plate extenders as shown (Ref. “B” & “C”) using 6mm x 12mm flat head screws and saved screws in (Step #5).
8. Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjusting.
9. Reinstall air intake hose assembly (Step #2).
10. Install throttle body intake cover. * Please Note: Make a cutout for the cruise control cable. (Ref. “D”)
11. Reconnect negative battery cable. Enjoy

Get pdf 01-03 Ford Ranger/SportTrac 4.0L SOHC PowerAid Throttle Body Spacer