Automotive Manual PDF

RSS Feed

The Resources for Automotive

96-00 Chevrolet/GMC C/K 7.4L PowerAid Throttle Body Spacer Installation Instructions

September 18th, 2009 · No Comments

Installation Instructions:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air cleaner assembly.
3. Using 10mm socket remove (3) nuts and studs from front side of throttle body. (Ref. “C”)
4. Remove air cleaner mounting stud and bolt from throttle linkage bracket and save.
5. Install (2) linkage extension plates using (2) 5/16 x 3/4” flat head screws. (Ref. “D”)
6. Install air cleaner mounting stud (Refer to Step 4) using 5/16-18” nut and lock washer.
7. Install power plate using (2) gaskets. (Ref. “A”)
A. Place one gasket between the throttle body and the power plate
B. Place second gasket between the power plate and intake manifold.
8. Replace nuts and studs (Refer to Step 3) with (3) 6mm x 60mm bolts.
10. Inspect & Test the throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjustment.
11. Reinstall air cleaner assembly using Step 2 as an example.
12. Reconnect battery cable. Enjoy!

Get pdf 96-00 Chevrolet/GMC C/K 7.4L PowerAid Throttle Body Spacer Installation Instructions

Related Entries


Related Tags: , , , , , , , , , , , , , , , , , , ,


Related Keyword: 1990 GM C/K 1500 throttle body bolts for fastening throttle body to manifold, 1990 throttle bodt break down, 99 gmc 7 4l tps wiring, throttle body gmc 1990 schematic

0 comments for this entry ↓

  • There are no comments yet for this entry.

You must log in to post a comment.