Automotive Manual PDF

RSS Feed

The Resources for Automotive

Honda TRX500 Foreman Rubicon, GPScape Winch Mounting Instructions

November 9th, 2009 · No Comments

INSTRUCTIONS:
1. Remove the plastic lower front skid plate and the plastic upper bumper guard.
2. Remove the two bumper mounting bolts from the horizontal legs of the bumper.
3. Install the U-Clamps at the front of the horizontal bumper mounting legs from the outside, per the illustration.
4. Install the mount per the illustration by reinstalling the original bolts at the back and installing the provided 1/4″ x 1-3/4″ bolts, 1/4″ flat washers and 1/4″ nylock nuts through the mount and U-Clamps.
5. Tighten all nuts and bolts securely.
6. Install the winch to the winch mount using the hardware provided with the winch.
7. Install the roller fairlead to the winch mount using (2) 5/16″ x 3/4″ bolts and 5/16″ nylock nuts provided. (Rollers should turn freely).
NOTE: Bottom roller may need to be removed to run wire rope through.
8. Using the instructions provided with the winch, wire accordingly.
9. Reinstall the plastic lower front skid plate and the plastic upper bumper guard.

Get pdf Honda TRX500 Foreman Rubicon, GPScape Winch Mounting Instructions

Related Entries


Related Tags: , , , , , , , , , , ,


Related Keyword: 2004 Foreman Carburator diagram, 2004 honda foreman carb intake manifold gasket, how to install winch mounting plate on 2004 honda rubican, installing a 1527x winch on honda foreman, installing warn winch on trx500

0 comments for this entry ↓

  • There are no comments yet for this entry.

You must log in to post a comment.