Automotive Manual PDF

Attaching motor to linkage assembly
The motors must be attached to the linkage assemblies before continuing the installation process.

Steps 1-3 for Heavy Duty Trucks only! For all other vehicles skip to Step 4.
HD - Short Bed: Remove forward most brake cable guide.
HD - Long Bed: Remove first and third brake cable guide.

Install replacement brake cable guides.
HD - Long Bed: Install plastic brake cable guide in forward hole of rear body mount.
SILL DRAIN
Rear linkage assembly. Template position for Tahoe and Yukon shown in hidden lines.

With drill template secured with vise grips, drill 1/8” starter holes. Remove template and drill holes to 21/64”.

Clamp drill template about 1/16” forward of the rearmost sill drain.

Get pdf Chevrolet Silverado / GMC Sierra 1999–2006