Automotive Manual PDF

AMP RESEARCH BEDSTEP™ – DODGE RAM
Locate rear bumper attachment point on driver side. Remove bumper fasteners. Install upper mount onto linkage as shown and torque bolts to 33 ft-lbs / 44 Nm. Slide upper mount over factory studs, install fasteners and torque to 59 ft-lbs / 80 Nm. Install step pad assembly onto linkage assembly with two socket cap screws. Adjust step pad position side to side. Allow for foot access. Torque allen head bolts to 10 ft-lbs / 13.5 Nm.

AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper maintenance. This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair of replacement of any item found by the factory to be defective within the time period specified. If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.

Get pdf Dodge Ram 2002-2007 AMP Installation