Automotive Manual PDF

Instructions:
• Read instructions completely before beginning installation.
• Installation should take less than one hour with the proper tools.
• As you remove the stock components, pay careful attention to how things were attached or located. In many cases, the components will be reinstalled in the same way as they were removed.
• NOTE - take care when working on this vehicle to stay clear of the electric fans - they may turn on at any time.
• Set parking brake and open hood. If you have been using the car, allow it to cool before beginning installation.
• The original plastic intake is mounted to the radiator shroud with a two piece plastic fastener. Pry the center piece out with the screwdriver and the other part of the fastener should come out easily. Save this fastener.
• Using the screwdriver, loosen the worm-gear clamp near the air filter box. It should take roughly six (6) complete turns of the screw to loosen the clamps enough (make sure that the threads are catching and loosening the clamp and not backing out the screw).
• Using the blade screwdriver, pry loose the plastic collar on the rubber elbow that connects to the stock plastic intake.
• Disconnect the A.I.R. pump hose from the back of the original intake. To do so, loosen the plastic collar by carefully prying under the plastic tabs (pry between the bottom and second from the bottom parts). After you have loosened the plastic collar, slip it down the tube. Now work the tube loose from the plastic intake.
• Pull up on the air box. Work the air box loose from the plastic intake.

Get pdf 1993 5.7L LT1 V8 Chevrolet Camaro & Pontiac Firebird Lingenfelter SuperTube Air Intake System