Automotive Manual PDF

This manual contains an introductory description on the SUZUKI SV1000S and procedures for its inspection/service and overhaul of its main components. Other information considered as generally known is not included.
(more…)

[Read more →]

Your new Vengeance Motorcycle is designed and manufactured to be the finest in the American V-twin industry. We have prepared a simple and understandable guide for your motorcycle’s care and operation and recommend that you follow the instructions carefully for maximum performance, vehicle safety, and enhanced personal motorcycling pleasure. You should become thoroughly acquainted with your manual before riding your Vengeance Motorcycle.
(more…)

[Read more →]

The engine is designed from the ground up, specifically for outboard use, by Suzuki engineers who draw on decades of knowledge gained through the manufacture of not only outboards, but also technologically-advanced motorcycles and automobiles.The product of their labors is an all-new 3.6-liter DOHC, 24-valve V6 engine that holds some of our most advanced and innovative ideas to date. Upon its base we have created three configurations, each of which is designed to deliver the ultimate in power and performance.
(more…)

[Read more →]

Fuelpak maps for the LTR450 were created with a White Brothers Power Pro performance module installed. The included Power Pro unit must be used in conjunction with the Fuelpak for proper function. Failure to do so will result in poor performance and may cause engine damage.
(more…)

[Read more →]

Refer to your Owner’s Manual for instructions on lowering and removing the canvas top. ALL hardware for your soft top should be removed. This includes the trim around the body. Some of the screws from the Canvas Top Hardware will be used in the Hardtop installation, so keep them available.
(more…)

[Read more →]

1 After bike is cool make sure the bike is secured before beginning the installation.
2 Remove the right side lower fairing bolts and pull the fairing out from the push pin/rubber connector.
3 Fully loosen the muffler clamp from the header collector.
4 Remove the 3 muffler mounting bolts (2 on the right side, 1 on the left side).
5 Carefully remove the stock muffler and place in a safe location.
(more…)

[Read more →]

This bulletin contains additional technical and service information for the VZR1800K7. Please place a copy of this bulletin with your dealership’s VZR1800 Service Manual.

SUBJECT: SUPPLEMENTAL SERVICE MANUAL INFORMATION
MODEL: VZR1800K7
REFERENCE: VZR1800 SERVICE MANUAL (P/N 99500-39290-03E)

Get pdf Suzuki VZR1800 Supplemental Service Manual Information

[Read more →]

Let’s begin by disconnecting the positive terminal of the battery (or removing the battery altogether) and draining the oil. I happened to need an oil/filter change at the same time I was replacing my stator so the timing worked nicely. Some riders will just lean their bikes to the right, against something stable, so that when the left crankcase cover is removed no oil will drain out. Here is the left crankcase cover gasket. I’m holding it upside down, sorry. This is part number 477686-001.
(more…)

[Read more →]

The Suzuki CAT1 consists of the following main components;
• Installed CAT1 main unit
• 2 x remote transmitters
• Installed protecting switch
• Installed system fuse and spare fuse
• LED system indicator
(more…)

[Read more →]

This bulletin contains service manual correction information for the VZR1800. Please change the valve spring specifications in your dealership service manual based upon the information provided below. Insert a copy of each of the attached pages with clutch washer information into your dealership service manual at the appropriate page.
(more…)

[Read more →]