Automotive Manual PDF

Parts Needed For This Radio Install Parts REQUIRED for the install Description Dash installation kit Multi purpose General Motors Snap on in dash wire harness General Motors 1978 - 1988 You will need one antenna extension cable. Typical lengths: 6”, 1 ft, 3 ft 4 small washers
(more…)

[Read more →]

The T-Harness is an optional accessory designed to cut the install time of the remote starter by 50% or more. Each T-Harness is manufactured specifically for your vehicle. The T-Harness will eliminate any wire splicing needed to make the remote starter operational. The T-Harness will plug in between the vehicles ignition switch then directly to the remote starter control module.
(more…)

[Read more →]

STAR Auto Scanner is the latest automotive diagnostic innovative product based on both automotive electronics and information technology.

Features
Convenient to Update
- The function of software update via Internet makes it easy for customer to get the latest diagnostic program and keep pace with the development of automotive technology.
- Multilanguage display makes operation convenient in different countries and areas.
(more…)

[Read more →]

Congratulations on your new EXeS Digital HID Conversion Kit! Please abide by your local transportation laws as this kit is intended for off road or show use purposes only. Please take your time in reading this guide as it will assist you in the installation process. Please pay attention to the exclamation marks as they have been added to alert you in an important part of the installation process and it is necessary to pay close attention to the notes following an exclamation mark.
(more…)

[Read more →]

This manual has been developed to help ensure an enjoyable experience as you boat, wakeboard and ski with your MasterCraft boat. As stated earlier, this information is not all-inclusive. There are many other factors to consider and additional information that you need to research before undertaking any boating.

Beyond the study involved, you should also always use common sense when boating. For example, when an- choring your boat so that you can enjoy swimming, you MUST turn the engine OFF. Exhaust fumes are emitted from the exhaust flap area of the transom, immediately below the swim platform. No one should ever be on the swim platform or transom.
(more…)

[Read more →]

This booklet contains important information about the warranty coverage of the General Motors warranties covering your new Cadillac. Keep it with your vehicle and make it available to a Cadillac dealership if warranty work is needed. The booklet should remain with your vehicle when you sell it so future owners will have the information.
(more…)

[Read more →]

This product is designed for fuel-injected, automatic transmission vehicles only.
Installing it in a standard transmission vehicle is dangerous and is contrary to its intended use.
- Please read this entire installation guide before beginning the installation. The installation of this remote start system requires interfacing with many of the vehicle’s systems. Many new vehicles use low-voltage or multiplexed systems that can be damaged by low resistance testing devices, such as test lights and logic probes (computer safe test lights). Test all circuits with a high quality digital multi-meter before making connections.
(more…)

[Read more →]

Please take a few moments to review this manual thoroughly before you begin work: Μake quick parts check to make certain your kit is complete (see shipper parts list in this package). If you discover shipping damage or shortage, please call our office immediately. Take a look at exactly what you are going to need in terms of tools, time, and experience.
(more…)

[Read more →]

This chapter provides information required for the installation of the Neo Changer, it must be read by all users. Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in.
(more…)

[Read more →]

MOUNTING THE AT 500 TO YOUR BENCH
Place your AT 500 on the edge of a sturdy bench or table where you plan to mount it. Give yourself about 12 inches of work space on each side of the machine to allow room for components.
Using the machine itself as a template, mark and drill four 1/4” holes in your bench and bolt your AT 500 securely to it.
Avoid using wood or lag screws to mount your reloader to the bench. These types of screws can loosen over time.
(more…)

[Read more →]