Automotive Manual PDF

The Audio2car is designed to provide endless hours of listening pleasure through most vehicles’ factory radios. To ensure that your Mobile Device performs correctly in your car or truck, we recommend that you read this entire manual before attempting installation of the Audio2car interface.
The Audio2car interface will allow you to connect your Mobile Device to […]

[Read more →]

Selecting The Vehicle Type
Switches 1,2, and 3 are used to select vehicle type. Use the chart on the back of these instructions to determine which of the above switch settings you will need.
Window Roll Up Function
Turn Switch 4 on (up position) to enable the window roll up function or off (down position) to disable window […]

[Read more →]

Adapter Installation Location:
The HONASX connects to the 14-pin connector on the back of the factory head unit.
Compatible Radios:
The HONASX is compatible with ‘03-’06 Honda CD changer control head units with 14 pin connector. Note: As vehicle manufacturers continually introduce updated radio models there may be instances where the interface is not compatible. Please contact Technical […]

[Read more →]

Prepare for the installation.
• If possible, install the SWI-ALP while you are installing the new head unit. Keep in mind you may need to plug in the factory stereo to locate certain wires; therefore do not complete the head unit installation until the SWI-ALP is working properly.
• Plan a general installation location for both the […]

[Read more →]

Preparation
1. Turn off car engine and remove key from ignition
2. Un-mount your radio from the dash in order to get access to the back side of the radio.
Adapter installation
3. Attach square 14 pins connector to the back of the Honda stereo.
4. Find a place where you can place Car2PC. In many cars there is enough […]

[Read more →]

INSTALLATION
1. Make sure you have the anti-theft code for the audio system and the navigation system (if equipped).
2. Disconnect the negative cable from the battery.
Removing the vehicle parts
3. Shift the select knob to “D” position by pressing down on the shift lock stopper with the ignition key. Remove the left side center panel (eight clips […]

[Read more →]

The GMCOL29 allows aftermarket radio installation without retention of the factory radio. The interface replicates all factory warning chimes, audible turn signal indicators and provides a data bus generated 12 volt accessory output that acts just as GM’s R.A.P. (Retained Accessory Power) system did prior to radio removal. R.A.P. keeps the radio powered after the […]

[Read more →]

The D-440A features a long life heated sensor technology that is designed to detect the more current and difficult HFC refrigerants such as R-134a, R-410a, R-404a, R-407c, and R507 in addition to all HCFC (R22) and CFC (R12) refrigerants including SNAP approved hydrocarbon blends.
The D-440A’s unique digital leak size indicator takes the guesswork out of […]

[Read more →]

One thing people regularly wonder about is how a CVT (Constant Variable Transmission) works. CVTs are used mostly in scooters, like the 50cc Aprilia SR50 DiTech this document describes, but some larger scooters also use CVTs, and they are even being used on some Audis now! If you’ve ever been confused about that strange little […]

[Read more →]

This chapter states the safety instructions which must be followed when installing, operating and servicing the ACS 300. If neglected, physical injury and death may follow, or damage may occur to the AC drive, the motor and driven equipment. The material in this chapter must be studied before attempting any work on or with the […]

[Read more →]