Automotive Manual PDF

Installation Instructions
1. After bike is cool make sure the bike is secured before beginning the installation.
2. Remove the right side fairing (refer to the owners manual for more information on removal).
3. Remove the stock exhaust from the bike. Unbolt the exhaust mount on the rear peg and loosen the collector clamp and remove the stock […]

[Read more →]

Before Installation:
• Verify that all parts and accessories have been included (see list below).
• Coat all exhaust pipe mating joints with anti-seize compound / lubricant (Finish Line Ti-Prep packet included).
• Read and review these instructions, cautions, diagrams and images prior to starting any work.
1. Remove the lower fairing.
2. Remove the existing exhaust system from the […]

[Read more →]

In order to remover the factory turn signals and install ours, you will need to remove the entire upper fairing. 2.) Remove the original turn signals from the upper fairing. You can cut the connector off the factory turn signals and splice it into the G.C. turn signals. Simply place the G.C. signals into the […]

[Read more →]