Automotive Manual PDF

The CamFC has an AFC (air/fuel controller) onboard so that the fundamental fuelling issues related to the addition of tuning accessories such as extractors, exhausts, adjustable cam gears, filters and mild cams can be resolved. The Cam switching point is adjustable in 1 RPM increments and the switch off point is adjustable as well.

[Read more →]

The installation of the supplied high pressure fuel pump requires removing and reinstalling the fuel tank. An automotive lift makes this job much easier. The fuel tank can be removed with the car on jack-stands, provided you have the car high enough, and an assistant ready to help you. Our recommendation is to use an […]

[Read more →]

PRE-INSTALLATION NOTES
1. Trail Master Systems do not incorporate components to accommodate extended cab and/or two piece driveshafts unless otherwise stated. Post installation the vehicle may experience driveline vibrations. Driveline angles may require tuning, slider on shaft may require replacement, shafts may need to be lengthened, shafts may need trued, and U-joints may require frequent replacement. […]

[Read more →]

Study these instructions completely before proceeding. Engine and/or turbocharger damage may occur if any component within these instructions is improperly installed. Turbonetics, Inc or any of its distributors cannot be held responsible for damages as a result of negligent or improper installation. This complete turbocharger system can be installed using common tools and automotive procedures, […]

[Read more →]

The lives of people depend on your proper installation and servicing of Federal products. It is important to read and follow all instructions shipped with the products. In addition, listed below are some other important safety instructions and precautions you should follow:
Before Installation
Qualifications
• To properly install an electronic siren: you must have a good understanding […]

[Read more →]

This document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation technician and operator must read this manual completely. Important information is contained herein that could prevent serious injury or damage.
• Proper installation of this product […]

[Read more →]

Ford Motor Company salutes the towing industry and applauds you for your many fine years of service to the automotive industry. We will continue to work with you to provide our customers and yours with damage-free towing. This manual contains the latest towing procedures for 2002 Ford, Lincoln and Mercury passenger cars and light trucks. […]

[Read more →]

This alternator is uniquely designed and engineered to provide the finest performance and durability for your vessel. Unlike most automotive-type alternators found standard on the majority of pleasure craft and marketed as lower-priced marine alternatives, our marine alternators are built specifically to provide exceptional output at lower engine r.p.m’s typical of marine diesel engines, so […]

[Read more →]

With the alarm disarmed, switch the ignition ON. Within 10 seconds press the valet switch 6 times, after 2 seconds, the siren will chirp for 2 seconds and then the system enters into the code learning mode. Within another 10 seconds, press any button of the first transmitter, the siren will chirp for 1 seconds […]

[Read more →]

This installation guide should be used in conjunction with a authorized Honda / Acura factory service manual and the installation should be performed by a trained automotive technician.
‘Supplied Hardware:
Timing Gear Pulley - 2
Camshaft Key (OEM Honda) - 2
SS 1/4-28 SHCS-12

[Read more →]