- Brake Warning System Installation Instructions Reference the appropriate Ford Shop Manual as needed and use proper shop practices to protect personnel and vehicle. WARNING LIGHT 1. Disconnect battery negative cable. 2. Locate the OEM GRAY, 6-pin connector above
- IRS Polyurethane Subframe Bushing Kit Thank you for purchasing Maximum Motorsports’ Polyurethane IRS Subframe Bushing Kit. This kit is intended for use on the 1999-2004Cobra IRS subframe. The polyurethane bushings in this kit are considerably
- Auto Dismantlers Guide to Recycling Mercury Switches Mercury in Maine’s environment is a problem, particularly for infants and young children. The Environmental Protection Agency estimates that 630,000 infants are born every year in the United States with
- 1987-1990 Dodge Pickup 3 Body Lift Kit Installation Instructions 1. Remove the negative battery cable first, then the positive battery cable. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected. 2. Measure and record the
- PowerStep Lighting Kit Installation Guide The lighting kit requires that you have the newer Power Step control module. If you don’t have the correct module, the correct part number is listed on the previous page.
- GM Duramax 6.6L Edge LLY EZ Module Installation Instructions and Manual Thank you for purchasing the Power Edge LLY EZ Module for the Chevy/GMC Duramax® Diesel LLY. The EZ module has been developed and produced from the highest quality materials available
- 2003-05 Honda VTX 1300 R K-2's Installation Instructions You have purchased the finest exhaust system available on the market today! Your Hard-Krome exhaust system has been carefully designed and tested in the dyno room and on the road
- Subaru Forester Car Subaru Forester Car on the road
- 1998 Ford Escort Owners Manual What you should do if the Service Engine Soon light illuminates Light turns on solid: This means that the OBD II system has detected a malfunction. Temporary malfunctions may cause your Service
- 1999 Chevrolet Silverado Push Bar Assemblies Installation Instructions STEP 1. Remove the contents from the box and check for any damage. Verify all parts against the parts list. STEP 2. Read and understand instructions completely before beginning installation. STEP 3.