Automotive Manual PDF

RSS Feed

The Resources for Automotive

Search for: duramaxdiesel

  • StealthOne on BMW car Owners Manual PDF
    • This is a manual StealthOne with any of these BMW models: • 7-Series (E38) • 5-Series (E39) • X5 (E53) • 3-Series (E46) • Z4 (E85) • MINI (MINI) Since
  • Retrogauge Mini-Tach Instructions
    • The RetroGauge™ Mini-Tach is designed for use with a standard ignition coil as factory fitted to 1967 and 1968 Ford Mustangs. For aftermarket ignition systems please read the important application
  • AODE Transbrake Instructions
    • This transbrake has been thoroughly tested before being packed and shipped. Proper operation depends on following a few basic instructions. As you may know, the AODE/4R70W transmissions are computer controlled
  • 1989 Mustang 5.0 LX Coupe Door Panel Clips Installation Instructions
    • Door panel clips get torn up pretty badly if the panel was ever taken off after Ford originally put them on. This results in some annoying squeaks and rattles from the
  • FD Transmission Rebuild: Parts Inspection
    • Now that everything is disassembled, cleaned, and bagged in labeled Zip-Locs, it’s time to decide what to replace. Warning: I’m not a transmission specialist – I’m only telling you how
  • Back Up Light System Wiring Instructions
    • The wiring of the Back Up Light system is very simple and straightforward. Each unit has 3 wires that must be wired to your vehicle to make the unit operate.
  • The Peugeot 807 Brochures
    • When you choose a Peugeot, you’re buying more than an elegant piece of design or a superb piece of engineering, you’re buying a vision – our dream of a marque
  • Brake Warning System Installation Instructions
    • Reference the appropriate Ford Shop Manual as needed and use proper shop practices to protect personnel and vehicle. WARNING LIGHT 1. Disconnect battery negative cable. 2. Locate the OEM GRAY, 6-pin connector above
  • 2004-05 F-150 4dr/5.4L 3” Body Lift without Factory Receiver
    • PRE INSTALLATION NOTES 1. The radiator MUST be drained and refilled for proper installation. Buy the correct coolant before you begin the installation. Coolant not included in kit. 2. A 9/16” drill
  • Active Autowerke E46 M3 Supercharger Instructions
    • Disassemble 1. Remove Front Under Panel by removing the seven 8mm hex screws 2. Remove Front bumper. On 11/01 and up models remove the four 8mm hex screws from under the car