Automotive Manual PDF

The AEM air bypass valve is ONLY compatible with genuine AEM intake systems. You must ensure that the valve is installed in the correct location for your vehicle and that the rubber soft mount that was originally supplied with the AEM intake is properly installed. The structural integrity of the valve depends on correct installation. […]

[Read more →]

By choosing the FOCUS 3-MODE remote you have opted for the User Friendly remote control solution. Made according to the highest quality, the FOCUS 3-MODE will provide you with long-term satisfaction. Please read these enclosed instructions carefully before putting your FOCUS 3-MODE to use.
Batteries
Your FOCUS 3-MODE Remote requires 2 new “AA/LR6″ Alkaline batteries.
1. Push and […]

[Read more →]

1. Check all parts. Read and understand instructions completely before beginning installation. Clean the under side of the frame. Clean out the weld nuts in the frame.
Parts List:
1) Hitch
6) 10mm - 1.25 x 40mm Hex Bolts
6) ł/₈” HD Flatwasher
6) 10mm Lockwashers
2. Remove the exhaust hangers and lower the exhaust to ease installation.
3. Remove the tow […]

[Read more →]

The AEM Cold Air Systems are 50 states Street Legal (some model and years still pending) and come with complete instructions for ease of installation. Our system is constructed of lightweight aluminum and then painted with a zirconia based powder coat for superior heat insulating characteristics. The aluminum will not crack in extended use like […]

[Read more →]

When installing this exhaust system make sure to use proper safety precautions. Use jack stands when working under the vehicle, set parking brake, block tires and use safety glasses and gloves. Allow exhaust to cool before attempting installation. Severe injury or burns could occur if safety measures are not taken.
SUGGESTED TOOLS: 1/2″, 9/16″, 12,14,15mm wrenches […]

[Read more →]

The Audio2car is designed to provide endless hours of listening pleasure through most vehicles’ factory radios. To ensure that your Mobile Device performs correctly in your car or truck, we recommend that you read this entire manual before attempting installation of the Audio2car interface.
The Audio2car interface will allow you to connect your Mobile Device to […]

[Read more →]

Turn the front wheels all the way to the left or right for mud guard installation. However, it may be necessary to remove the wheels depending on the tools being used for installation.
1. Clean and degrease the mud guard location area on the fender before installation.
2. Remove existing fastener from location D (Figure 1).
3. Attach […]

[Read more →]

Selecting The Vehicle Type
Switches 1,2, and 3 are used to select vehicle type. Use the chart on the back of these instructions to determine which of the above switch settings you will need.
Window Roll Up Function
Turn Switch 4 on (up position) to enable the window roll up function or off (down position) to disable window […]

[Read more →]

The rack must be inspected before each use to make certain attachments are secure, and for evidence of Wear. Misuse of the rackor failure to observe the manufacit/rer ’s mär action s as to installation, proper Attachment and maintenance will void any warranties that may be implied by law.
1. Plastic Bag labeled #1 remove contents […]

[Read more →]

Installation requires a professional mechanic. Prior to beginning, inspect the vehicles steering, driveline, and brake systems, paying close attention to the suspension link arms and bushings, anti-sway bars and bushings, tie rod ends, pitman arm, ball joints and wheel bearings. Also check the steering sector-to-frame and all suspension-to-frame attaching points for stress cracks. The overall […]

[Read more →]