Automotive Manual PDF

PROCEDURE:
1. Remove push type retainers from lower splash shield. Remove plastic splash shield to access to mounting location.
2. Locate and remove bolts that hold the frame brace and bumper brackets to vehicle.
3. Install frame bracket between lower radiator support and frame brace using (3) existing bolts. As shown.
4. Cut plastic splash shield to allow brackets […]

[Read more →]

STEP 1. Remove the contents from the box and check for any damage. Verify all parts against the parts list.
STEP 2. Read and understand instructions completely before beginning installation.
STEP 3. Determine passenger and driver brackets. SEE FIGURE 1.
STEP 4. Remove (16) push type retainers from lower splash shield. Remove plastic splash shield to gain access […]

[Read more →]

STEP 1. Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely before beginning
STEP 2. Determine passenger and driver uprights and center section assembly and assemble as shown. Hand tighten all fasteners centered in slots or holes. Be sure dimple in ring mount plate is to the top.
STEP […]

[Read more →]

Pre-installation Preparation
1. Verify kit contents.
2. Remove protective wrapping from hog bar
and place on a non-abrasive surface.
3. Remove the brackets and hardware from
the box.
B. Remove Tow Hooks
1. Locate the Bolts that hold the tow hooks in
place we will be using these bolts for the
brackets.
2. Remove the bolts that hold the tow hooks
in place by using an […]

[Read more →]

This mounting clamp will mount to your Grand Vitara’s roof rack using the supplied mounting hardware. The lightbars mounting foot will mount to the bracket. It is recommended that two people do the installation as you will need to adjust both sides of the brackets and feet once it is on the vehicle.

[Read more →]