Automotive Manual PDF

By choosing the FOCUS 3-MODE remote you have opted for the User Friendly remote control solution. Made according to the highest quality, the FOCUS 3-MODE will provide you with long-term satisfaction. Please read these enclosed instructions carefully before putting your FOCUS 3-MODE to use.
Batteries
Your FOCUS 3-MODE Remote requires 2 new “AA/LR6″ Alkaline batteries.
1. Push and […]

[Read more →]

When installing this exhaust system make sure to use proper safety precautions. Use jack stands when working under the vehicle, set parking brake, block tires and use safety glasses and gloves. Allow exhaust to cool before attempting installation. Severe injury or burns could occur if safety measures are not taken.
SUGGESTED TOOLS: 1/2″, 9/16″, 12,14,15mm wrenches […]

[Read more →]

The Audio2car is designed to provide endless hours of listening pleasure through most vehicles’ factory radios. To ensure that your Mobile Device performs correctly in your car or truck, we recommend that you read this entire manual before attempting installation of the Audio2car interface.
The Audio2car interface will allow you to connect your Mobile Device to […]

[Read more →]

Installation requires a professional mechanic. Prior to beginning, inspect the vehicles steering, driveline, and brake systems, paying close attention to the suspension link arms and bushings, anti-sway bars and bushings, tie rod ends, pitman arm, ball joints and wheel bearings. Also check the steering sector-to-frame and all suspension-to-frame attaching points for stress cracks. The overall […]

[Read more →]

THIS ANTI-SWAY BAR IS DESIGNED TO REPLACE THE FACTORY INSTALLED REAR SWAY BAR AND UPGRADE THE FRONT SWAY BAR BUSHINGS.
1. Remove the factory installed rear anti-sway bar from factory mounts and end links.
2. Lubricate the D-shaped poly bushings and install on the sway bar in approximately the same location as the factory mounts. To ease […]

[Read more →]

INSTALLATION INSTRUCTIONS
1. Disconnect the negative terminal on the battery. Jack up the front end of the truck and support the frame rails with jack stands. Remove the front tires. NEVER WORK UNDER AN UNSUPPORTED VEHICLE!
2. Starting on the driver’s side of the truck, remove the nut securing the tie rod end to the spindle. Using […]

[Read more →]

When installing this exhaust system make sure to use proper safety precautions. Use jack stands when working under the vehicle, set parking brake, block tires and use safety glasses and gloves. Allow exhaust to cool before attempting installation. Severe injury or burns could occur if safety measures are not taken.
SUGGESTED TOOLS: 1/2″, 9/16″, 15mm wrenches […]

[Read more →]

Daystar recommends a certified technician install this system. In addition to these instruction , professional knowledge of disassemble/reassembly procedures as well as post instructions checks must be known. Attempts to install this system without this knowledge and expertise may jeopardize the integrity and/or operating of the vehicle.
Please read all the instructions before beginning the installation. […]

[Read more →]

Thank you for the purchase of this rear disc brake kit for the CRF/XR50! Everything is included in this kit to add a rear disc brake to your BBR Perimeter Aluminum Frame kit based motorcycle. If you are adapting this kit to the OEM Honda frame or another aftermarket frame kit, you will need our […]

[Read more →]

This manual must be accessible to the owner/user of this Morse marine product. Includes Installation, operation and maintenance instructions for your Morse marine product. Please read these Instructions through carefully and entirely before beginning Installation.

[Read more →]