Automotive Manual PDF

Edelbrock Performer series intake manifolds are designed for engines operating in the idle to 5500 rpm range. Performer RPM series intake manifolds are designed for engines operating in the 1500-6500 rpm range. Match Performer or Performer RPM intake manifolds with recommended carburetors and additional equipment for even greater performance increases.
EGR SYSTEMS: Edelbrock EGR-equipped Performer manifolds […]

[Read more →]

Why our nitrous system is better:
• A complete 1999-2004 Mustang GT specific nitrous system. Everything is included in this kit for a safe, easy, plug and play installation.
• Adjustable from 75-175 horsepower. Safe enough for stock engines, powerful enough for racing use.
• Uses a custom made Ford fuel rail adaptor. This component gives easy access […]

[Read more →]

To aid in installation, first gain access to the connection points. Remove the lower dash panel below the steering column and the engine cover. Also, gain access to the lift power switch and the lift door switch circuits. These are usually accessible in the front control panel. It is not necessary to cut any Ford […]

[Read more →]

Removal of Original System
1) Start under the vehicle. Remove the band clamp that holds the stock system to the converter by loosening the bolt and gently prying the clamp loose. If the clamp will not release continue to next step. When you have the rest of the system off shake the pipe from underneath the […]

[Read more →]

Removal of Original System
We suggest that a trained professional remove and install your exhaust.
1) Start under the vehicle. Remove the band clamp that holds the stock system to the converter by loosening the bolt and gently prying the clamp loose. If the clamp will not release continue to next step. When you have the rest […]

[Read more →]

The AEM Cold Air System is the result of extensive development on a wide variety of cars. Each system is engineered for the particular application. The AEM Cold Air System differs from all others in several ways. We take the inlet air from outside of the engine compartment where the inlet air is considerably cooler […]

[Read more →]

Diesel Turbo Lifesaver is a computer controlled device that allows you to set an automatic engine idle sequence to properly cool your turbocharger before engine shutdown as required by Ford and Navistar. Failure to follow recommended turbo cooling procedures can lead to premature bearing failure that is NOT covered under the factory warranty.

[Read more →]

Step 1- Determine the Correct Fuel Line Adapter
This section aids in determining the best fuel line adapter in your kit to use to maintain fuel supply for the E3 Fuel Saver 7000.
IMPORTANT
If you have Electronic Fuel Injection (EFI) system with a high pressure fuel line with a “Schrader valve fuel stem” proceed to the section […]

[Read more →]

You have just purchased the finest turbo system available for the 6.9 and 7.3 liter diesel engine. The following information will assist you in the installation of your ATS turbo system.
IMPORTANT: It is very important to read all the instructions carefully prior to any installation of your turbo system. Normal mechanical and safety procedures should […]

[Read more →]

Exhaust Brake and/or Torque Converter Controller Kit Contents
• Integrated Control Module.
• Harness with labeled connections for a hassle-free install. Every possible convenience was included in the harnessing to ensure an easy installation experience.
• Small Parts Bag. A baggie containing fuse taps, taps, connectors, and zip-ties and such has been included to aid your installation.
• Optional […]

[Read more →]