- Mazda3 - Maintenance Schedule Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2). -
- 1994 Toyota Engine Performance Theory & Operation This article covers basic description and operation of engine performance-related systems and components. Read this article before diagnosing vehicles or systems with which you are not completely familiar. COMPUTERIZED ENGINE CONTROLS
- LPE C5 Supercharger Kit Hood Installation Warnings/Instructions Before installing your supercharger hood, it is necessary to check the clearance of the supercharger itself and the aftermarket hood. You may have to perform some small modifications to the
- Rocket Locker Side Rails Installation Instruction Upon receipt of the Rocket Locker, the casting and the light should already be assembled and wires should be fed thru casting. Step 1: Feed wires thru hole in the oval
- GM Gen III & IV V8 Oil Cooler Adapter Block Kit Clean the block mounting surface area and then install the supplied gasket and oil cooler adapter block. Install the oil cooler adapter bolts and tighten the bolts to 106 in-lbs
- 1994-1997 S-Series 2/4WD, ZR-2 2 Body Lift Kit Installation Instructions 1. Park the vehicle on a clean, flat surface and block the wheels for safety. Place automatic transmissions in park and manual transmissions in neutral. 2. Remove the negative battery cable
- 1997 Honda Civic CX Magnaflow Exhaust System Installation Yes, it is somewhat simple and assumes that you’re fairly handy with exhaust systems. However, some of us don’t swap exhaust systems every other Saturday, so I’ll try to provide
- 850 SRS and SIPS Technical Data Exercise extra care when carrying out repair work on cars equipped with SRS (Supplemental Restraint System)/SIPS. This is to help prevent: 1. Personal injury during the repair work. 2. Damage or function
- 2004-05 F-150 4dr/5.4L 3” Body Lift without Factory Receiver PRE INSTALLATION NOTES 1. The radiator MUST be drained and refilled for proper installation. Buy the correct coolant before you begin the installation. Coolant not included in kit. 2. A 9/16” drill
- Bike Fitting Guide with Music System BMW R 1200 RT pdf Take off wing mirror covers surrounding glass. Remove the x2 T25 screws holding left hand side dash in position and the two other screws on top of the dash. Remove