This B&M Precision Sport Shifter has been designed to work on most 2002+ Acura RSX/Honda Integra (including 6- spd Type-S) and 2001+ Honda Civic models equipped with a manual transmission. It has been engineered to greatly reduce shift throw and improve shifter feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Precision Sport Shifter. Installation of the B&M Precision Sport Shifter can be accomplished by anyone with minimal mechanical experience.
(more…)
2002-Up ACURA RSX including 6-spd Type-S Precision Sport Shifter Installation
November 16th, 2009 · No Comments
2002+ Acura RSX & Honda Civic Si 328mm Front Big Brake Upgrade
November 4th, 2009 · No Comments
Wheel spacers can provide extra clearance to the outer face of the caliper. This will also space out the entire wheel, widening the track width of the vehicle. Fender clearances should be checked on lowered cars, and longer lug studs or wheel bolts are usually required. Note: The Wheel Industry Council has issued guidelines advising wheel spacers not be used. It is the responsibility of the customer to insure wheel spacers are properly specified and installed.
(more…)
Acura RSX Nitrous Oxide System
November 6th, 2008 · No Comments
Kit Number 05126NOS is intended for 4 cylinder 2000-2005 Acura RSX applications. This kit was designed to be used on late model multi-point fuel injection type engines with 43 psi ± 5 psi fuel pressure.
NOTE: This nitrous oxide injection system injects a mixture of nitrous oxide and fuel into the air intake duct. If the instructions are not carefully followed, poor mixture distribution can occur resulting in variations of air-fuel ratio from cylinder to cylinder. In extreme cases intake manifold backfires can occur if the instructions are not followed exactly.
(more…)
