Automotive Manual PDF

To Install
1. Attach the CTI Line with the swivel nut to the air valve.
2. Remove the ―” X 20 Nyloc Nut from the Valve
3. Put the air valve in the valve hole and hold in place.
4. Place Stainless Washer on Inside of Wheel under the Nyloc Nut.
5. Hand tighten the ―” X 20 Nyloc Nut onto the air valve.
6. Put the 9/16” open- end wrench on the swivel nut.
(more…)

[Read more →]

Installation Environment
1) The distance between the unit and outside wall or other goods should be kept over 200mm.The unit should be put in well-ventilated area and its temperature is within -10℃~+40 .℃
2) Check air supply pipeline of the unit and use air source with 3~10 bar to supply for the unit. When connecting the air source, please check if there is leakage in connector for air source and ensure that a certain distance between the air hose and heat source should be kept.
3) To ensure safety. Before connecting the air source, please confirm that the air pressure adjusting valve is closed. Never point the air outlet to personnel.
(more…)

[Read more →]

Your new Air Helper Springs are quality products capable of improving the handling and comfort of your vehicle. As with all products, proper installation is the key to obtaining all of the benefits your kit is capable of delivering. Please take a few minutes to read through the instructions to identify the components and learn where and how they are used. It is a good idea to start by comparing the parts in your kit with the parts list below.
(more…)

[Read more →]

“ENGINE” CONNECTOR
1. Unconnected
2. Unconnected
3. TPS throttle position sensor
The input is designed for standard TPS sensors used in motorcycles. It is designed to take voltage of 0 to 5 V. Specific settings of the sensor for particular types of motorcycles are included in the DUCATI.EXE software. The TPS is powered by the means of reference voltage + 5V and SENSE GND. The output of the sensor will be connected to the connector (3ENG).
4. Unconnected
5. TWS water temperature sensor
(more…)

[Read more →]

To find the proper air pressure for your tires, look in the vehicle owner s manual, on the driver s side door jamb or in the glove box. And if you buy new tires, be sure to learn the correct pressure from your dealer. Check your pressure at least once a month, and use a good quality air gauge. Or, stop by your local Goodyear dealer and have your air pressure checked and corrected for free. Maintaining proper air pressure is the single most important thing drivers can do for their tires. In the space of just one month, a tire can lose 10 pounds of air pressure.
(more…)

[Read more →]