By choosing the FOCUS 3-MODE remote you have opted for the User Friendly remote control solution. Made according to the highest quality, the FOCUS 3-MODE will provide you with long-term satisfaction. Please read these enclosed instructions carefully before putting your FOCUS 3-MODE to use.
Batteries
Your FOCUS 3-MODE Remote requires 2 new “AA/LR6″ Alkaline batteries.
1. Push and slide the battery door downwards and lift it up to remove it.
2. Match the batteries to the (+) and (–) marks inside the battery case, then insert the batteries.
3. Place the battery cover by sliding upwards and allowing it to click back into position.
- It is recommended that you do not use rechargeable batteries.
- On the inside of the battery compartment door you will find a label on which to write your Set-Up Codes for future reference.
(more…)
ADB Focus Universal Remote Instructions Manual
March 12th, 2010 · No Comments
Multifunction Instrument Model EFI User Manual
February 7th, 2009 · No Comments
The multifunction EFI is available in a small rectangular format and a larger round package that includes magneto test switches. Other than the magneto test switches, both formats are functionally identical. Both units simultaneously display all of the following data on a large, two-line liquid crystal display (LCD). Referring to the figures, the functions are; engine RPM, AUX, two exhaust gas temperatures (EGT), two cylinder head (CHT) or one Coolant temperature, Altitude, Climb rate and Flight Time. The unit also displays total accumulated engine time (Hobbs) at the push of a button. The LCD contrast can be adjusted from the normal seating position with the up/dn switch and provides a clearly readable display over a wide range of viewing angles. In addition, the LCD is backlighted for night viewing.
(more…)
