Automotive Manual PDF

1) Disconnect the vehicle’s negative battery cable.
2) Carefully remove the electrical plug at the mass-air sensor. (held in place by a small spring-wire clip) Move the wire out of harms way until re-assembly.
3) Loosen the intake tube where it connects to the mass-air sensor.
4) Unbolt the airbox assembly from the body. It is held in place with two bolts and one nut.
5) Carefully unclip the coil wire from the bracket at the rear of the mass-air sensor.
(more…)

[Read more →]

1 After bike is cool make sure the bike is secured before beginning the installation.
2 Remove the right side lower fairing bolts and pull the fairing out from the push pin/rubber connector.
3 Fully loosen the muffler clamp from the header collector.
4 Remove the 3 muffler mounting bolts (2 on the right side, 1 on the left side).
5 Carefully remove the stock muffler and place in a safe location.
(more…)

[Read more →]