Automotive Manual PDF

Tools/Supplies: Phillips screwdriver, windscreen, maybe glue
Step 1­ Remove the 2 screws just below the “HONDA” decal on the front cowl (just below the windscreen).
Step 2 ­ Remove the 2 screws on the pillars that connect the sides of the windscreen to the scooter (1 screw on each pillar, screw heads face driver)
(more…)

[Read more →]

This high quality kit is designed to fit most Honda and Acura models. This kit comes with:
- One 19-row oil cooler
- Braided stainless (AN -10) oil lines (3)
- Block adapter
- Filter mount
- Right-angle adapters (3)

While this kit is intended to work in most applications, this kit may require modification for some extremely modified vehicles or unique applications. Please contact us for more information. This kit is also intended to be used with a Honda-style oil filter (standard Honda thread). We do recommend the use of a larger, high-quality filter like the NSX or S2000 OEM fitments, or a Mobil 1 M1-105.
(more…)

[Read more →]

REAR SETUP (45” hose)
STEP 1: Lift the vehicle off the ground with a jack or on a stand. Remove the stock shock absorber from the vehicle. Install the Elka shock absorbers on the vehicle. The banjo bolt must face towards the front of the vehicle with the hose coming out on the left side. The rebound adjuster located at the bottom of the shock should face the rear of the quad for convenient access. The bottom fork of the shock can be turned 180° clockwise if needed.
(more…)

[Read more →]

Before installing your supercharger hood, it is necessary to check the clearance of the supercharger itself and the aftermarket hood. You may have to perform some small modifications to the supercharger in order for the hood to fit correctly. All motors do not sit at the same height, depending on the motor mounts. Depending on which hood you have purchased, there can be small differences in the way that the hood will fit. On most hoods, there are two major areas that can be of risk to cracking or otherwise damaging the hood.
(more…)

[Read more →]

2005 U.S. Volkswagen GTI Standard Equipment
Legend:
S Standard, at no additional charge O Option, at additional charge P Part of option package, at additional package charge - Not available EXTERIOR GTI 1.8T GTI VR6
Antenna Roof-mounted amplified flexible black whip antenna S S
Anti-Corrosion Fully galvanized sheet metal S S
Badging Rear/driver side/model badge S S
Rear/passenger side/1.8T badge S -
Rear/passenger side/VR6 badge - S
(more…)

[Read more →]