Front / Rear & Poly Spring Pads (PSP’s)
The SSA10 springs do NOT have a specific left or right side; however, they do have a specific front / rear side. Position the two-hole shackle to the front and the three-hole shackle to the rear. PLEASE NOTE: Two sets of PSP’s are included with these springs. The larger set is for Ford applications; the smaller set is for GMC and Dodge applications. See page three of these instructions for more details
(more…)
SuperSprings Model # SSA10 Installation Instructions
October 26th, 2009 · No Comments
1987-96 Ford F150/250 Pickup Dynomax Dual Kits Installation Instructions
July 5th, 2009 · No Comments
Read all instructions before starting any work.
1. Remove the exhaust system behind the catalytic converter assembly.
2. Grind or file the tab off the outlet end of the O.E. converter. Connect the intermediate pipe to the converter and clamp in place. This pipe will require cutting the outlet for the 133″ WB (standard cab, 8’ box). Cut to length after the muffler is in position (SEE #3).
3. Slip muffler hanger (36161) ends thru the rubber hangers. The clamp should be offset to the driver’s side. Install the muffler. The bracket clamps to the driver’s side outlet. Do not tighten yet.
(more…)
