Automotive Manual PDF

Installation
1. Slide four 5/16” dia x 1-1/4” wide U-bolts (C1) over the underside frame of the ATV. If unsure of their location, position the plow mount (A1) against the underside of the ATV, just in front of the skid pan, and find the approximate location of where the U-bolts go.
2. Once the U-bolts (C1) are in place, position the plow mount (A1) under the vehicle, and slide the legs of the U-bolts through the eight holes in the plow mount. Work on one U-bolt leg at a time, as a threaded end is exposed, terminate the U-bolt leg with a 5/16” dia flat washer (C2) and 5/16” dia nylock nut (C3). Continue until each U-bolt has a washer and nut on the end of it.
NOTE: Do not tighten the bolt and nut completely. You will do this in the next step
(more…)

[Read more →]