The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.”
NOTE:
• Be extremely careful not to damage the body.
• To prevent damage, rest the front bumper on a blanket or cardboard during the installation.
• Before removing parts, note their locations so that they can be reinstalled in their original locations properly.
(more…)
2009 TSX Front Aero Bumper Installation Instructions
November 14th, 2009 · No Comments
Shark Injector User’s Guide pdf
March 23rd, 2008 · No Comments
If you are not comfortable with this procedure please return your Shark Injector™ to your retailer for a prompt refund; 2. Locate the rectangular 16 pin OBD-II port in the interior of your BMW. It will generally be found in the driver’s under-dash area, or on the forward end of the passenger side of the transmission tunnel. It is covered by flip-top plastic cover engraved with the word “OBD”. In some cases there is a second removable “trim cover” over the actual plug assembly. Remove the “trim cover” if necessary, and open the flip-top cover to gain access to the OBD-II diagnostic port;
(more…)
