Parts included:
- main bracket, polished, chromed
- wide cateye taillight, w/ 36” long wires (if ordered)
- fasteners: (2) ž” x ―” bolts, nuts, (4) washers for main bracket
- (2) small washers for mounting taillight to main bracket
Rear fender assembly:
- remove seat – two bolts on side
- remove seat holding metal bracket (7,22)
- disconnect rear wiring harness from wiring cluster above battery; these include rear turn signal and rear brakelight wires
- remove 2 bolts on each side of rear fender strut (9,16); this will loosen the rear fender entirely
- lift off the rear fender assembly carefully, making sure not to scratch paint !
- remove seat nut (17), and carefully separate fender (12) from metal frame (13)
(more…)
