Thank you for the purchase of this rear disc brake kit for the CRF/XR50! Everything is included in this kit to add a rear disc brake to your BBR Perimeter Aluminum Frame kit based motorcycle. If you are adapting this kit to the OEM Honda frame or another aftermarket frame kit, you will need our adapter kit PN 550-HXR-5050. Because installation of this kit is beyond the control of BBR Motorsports, Inc, we cannot accept responsibilty for misuse or improper installation. This kit is intended only for use on off-road motorcycles. These instructions are intended only as a supliment to the proper Honda service manual. If the installation of this product is beyond your technical abilities please refer to qualified service personel.
(more…)
BBR Rear Disk Brake Kit Instructions
December 24th, 2009 · No Comments
Specialty Tigertop Installation Instructions
October 14th, 2009 · No Comments
Install Front and Rear Aluminum Angles
Using the bolts from the factory hard top or those supplied in the kit, install the aluminum angle rails in the existing holes on the top of the body edge. Fasten the bolts with the 5/16″ Nuts and 5/16″ Washers from the parts kit. There should be a 3″ space between the two pieces on each side for the Bow Mounting Bracket. There will be an extra hole at either end of the rails. Drill a 3/16″ hole in the body at these locations and use the #14 x 1/2″ Sheet Metal Screws to secure the rails in place.
(more…)
