1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Disconnect electrical connectors to throttle body & factory intake tube. See Fig#1
3. Using a 10mm socket, remove two bolts holding throttle cable bracket to intake manifold. Retain bolts for later use. See Fig#2
4. Remove throttle cable(s) from throttle body.
5. Using a Phillips screwdriver, loosen hose clamp on factory intake tube & remove tube from throttle body & air box. See Fig#3
(more…)
93-97 Honda Accord SOHC, DOHC, VTEC, Non-VTEC, 2.2L PowerAir Throttle Body Spacer
November 18th, 2009 · No Comments
Model 1524A Operating Manual
August 10th, 2008 · No Comments
Transmission Service with the Tranny Flusher
The number one reason for transmission failure is fluid breakdown. Over time, the automatic transmission fluid (ATF) becomes contaminated and loses its viscosity and the ability to lubricate the moving parts within the transmission. Conventional service methods of dropping the pan and changing the filter result in only about 30-40% of the total ATF in the transmission being drained out. That leaves 60-70% of the old ATF to be mixed with the new ATF introduced during service. Therefore, adequate lubrication is not achieved.
(more…)
