The AEM air bypass valve is ONLY compatible with genuine AEM intake systems. You must ensure that the valve is installed in the correct location for your vehicle and that the rubber soft mount that was originally supplied with the AEM intake is properly installed. The structural integrity of the valve depends on correct installation. Use of the AEM Air Bypass Valve in conjunction with any other system is neither recommended nor warranted and may result in, among other things, malfunction of the AEM Air Bypass Valve.
(more…)
Air ByPass Valve Installation Instructions: 20-400s, 20-401s, 20-402s & 20-403s
March 12th, 2010 · No Comments
Honda GL1000 Condenser Ground Upgrade Mounting Instructions
November 10th, 2009 · No Comments
All left / right descriptions are from the point of view of the rider when seated on the bike in the riding position.
Note: the condenser upgrade cable supplied will have a black cover to make it inconspicuous enough for a concours show bike. The example shown has a red cover to highlight the correct location and routing.
1. Place the bike on the center stand.
2. Remove the left side cover.
3. Loosen the rear engine mounting bolt. This is a long bolt that passes through both rear engine hangers. If mounted correctly, the nut, washer and lock washer should be on the right side of the bike. Yours may be reversed.
(more…)
