Automotive Manual PDF

Adjusting the Control Unit
• Use a small flat-tip screwdriver to change the mode switch and the horn/siren switch and to adjust sensitivity
Mode Switch:
• Set the mode switch according to the customer’s choice.
• Refer to the Owner’s Manual for the explanation of each mode.
Horn/Siren Switch:
• Set the switch to “HORN” in normal use. If an optional siren is installed, set the switch to “SIREN.”
(more…)

[Read more →]

1. If equipped, make sure that you have the anti-theft code for the radio, then write down the frequencies for the preset buttons on the radio.
2. Slide the driver’s seat completely to the rear.
3. Disconnect the negative cable from the battery.
4. Open the glove box. Squeeze the retaining tabs, and remove the stop. Pull the glove box down.
5. Remove the driver’s dashboard lower cover (two self-tapping screws, four retaining clips and one connector).
6. Remove the lower console cover.
(more…)

[Read more →]