Automotive Manual PDF

Adjusting the Control Unit
• Use a small flat-tip screwdriver to change the mode switch and the horn/siren switch and to adjust sensitivity
Mode Switch:
• Set the mode switch according to the customer’s choice.
• Refer to the Owner’s Manual for the explanation of each mode.
Horn/Siren Switch:
• Set the switch to “HORN” in normal use. If an optional siren is installed, set the switch to “SIREN.”
(more…)

[Read more →]

Some vehicles may experience difficulty starting (cranks no start). This may occur after driving the vehicle a short distance without engine reaching normal operating temperature. Examples: starting a vehicle and moving it to wash it, engine stall due to mis-application of clutch then restart. This commonly occurs at port facilities or dealer lots where vehicles are frequently started cold, moved for short distances and then turned off. This concern may also occur due to low cranking RPM during engine starting.
(more…)

[Read more →]