This kit includes new braided stainless steel brake lines. Installation of these lines requires the entire brake system to be bled following the completed installation and prior to operating the vehicle. Consult your owner’s manual for the proper brake fluid to use for your vehicle. Fluid is not included in this kit.
(more…)
1987-1995 Jeep YJ 4.5” Suspension System
July 21st, 2008 · No Comments
GM Leaf Spring 2″, 4″, 6″, 8″ Suspension Systems
July 6th, 2008 · No Comments
Installation Instructions Front
1. Raise vehicle and place jack stands under frame approximately 3” behind front spring shackles. Remove front wheels and shocks.
2. Remove one rivet from the outside of the frame at the engine cross member closest to the OE hose to steel line connection. Attach the 90 degree brake line extension brackets using the 3/8” x ” bolts, nuts, and lock washers.
3. Disconnect front brake line at frame and reroute through extension brackets and secure. CAUTION: Careful attention must be exercised in rerouting. Do not kink, pinch or stretch lines! When both sides have been completed, bleed the brakes. Refill the master cylinder with Dot ap- proved fluid.
(more…)
Nissan Outboard Motor NS60B NS70B Owners Operating Manual pdf
March 30th, 2008 · No Comments
This operator’s manual contains information on the operating procedures, preventive maintenance and inspection procedures of the Nissan Marine Outboard Motor Model NS60B. NS70B. Please read this manual thoroughly before operating your Nissan outboard motor. You should become familiar with correct operating procedures so as to assure many years of safe and pleasant boating
(more…)
