Automotive Manual PDF

INSTALLATION:
1. Remove early Ford drums, brakes and backing plates from spindles. Make sure you retain the bearing nut and keyed washer.
2. Thoroughly clean grease and dirt from spindle. Check for cracks and damage.
3. Using the hardware supplied in the kit install the caliper mounting bracket on the REAR surface of the spindle using the lockwashers between the spindle and mounting bracket. DO NOT omit lockwashers as they are essential to the proper alignment of the bracket. If round spindles are being used check for adequate clearance between the spindle and bracket. FILE BRACKET if necessary. The bracket may be installed so caliper is forward or rearward of spindle centerline. REARWARD INSTALLATION IS HIGHLY RECOMMENDED.
(more…)

[Read more →]

Someone who has a basic knowledge of automobile repair and modification and is familiar with and comfortable with working on their vehicle can accomplish the mechanical installation of this kit using common tools and procedures. However, this kit is designed to allow you to custom fit the fuel lines and components to your application, and will require that you cut hoses to fit and drill holes for fuel pressure regulator mounting, junction blocks, etc. If you do not feel comfortable with any of the steps listed below, please consult a qualified professional installer. Make sure to read the instructions provided with the supplied fuel rail and fuel pressure regulator. These will be referenced throughout this instruction sheet.
(more…)

[Read more →]

Someone who has a basic knowledge of automobile repair and modification and is familiar with and comfortable with working on their vehicle can accomplish the mechanical installation of this kit using common tools and procedures. However, this kit is designed to allow you to custom fit the fuel lines and components to your application, and will require that you cut hoses to fit and drill holes for fuel pressure regulator mounting, junction blocks, etc. If you do not feel comfortable with any of the steps listed below, please consult a qualified professional installer. Make sure to read the instructions provided with the supplied fuel rail and fuel pressure regulator. These will be referenced throughout this instruction sheet.
(more…)

[Read more →]