AMSOIL Synthetic Manual Transmission and Transaxle Gear Lube (MTG) is a premium blend of the finest synthetic base oils and advanced, high-performance additives. It is formulated specifically for maximum protection in the most demanding manual transmission and transaxle applications where an extreme-pressure GL-4 gear lube is specified, including those where high-horsepower/high-torque engines and towing or heavy loads increase transmission stress.
(more…)
Synthetic Manual Transmission & Transaxle Gear Lube
October 14th, 2008 · No Comments
Synthetic Manual Transmission & Transaxle Gear Lube
August 3rd, 2008 · No Comments
AMSOIL Synthetic Manual Transmission and Transaxle Gear Lube (MTG) is a premium blend of the finest synthetic base oils and advanced, high-performance additives. It is formulated specifically for maximum protection in the most demanding manual transmission and transaxle applications where an extreme pressure GL-4 gear lube is specified, including those where high horsepower/high torque engines and towing or heavy loads increase transmission stress.
(more…)
88-98 Chevy/GMC K1500/2500 6 Lug 4wd 6″ Suspension System Installation Instructions
July 25th, 2008 · No Comments
1. Park the vehicle on a clean, level surface and block the rear wheels for safety.
2. Safely raise the front of vehicle and support with jack stands for safety.
3. Remove the wheels.
4. Measure and record the length of the exposed thread on the torsion bar adjusting bolts for later reference.
DRV__________ PASS__________
(more…)
2001-2007 Chevy/GMC 2500 HD 4wd 6″ Suspension System Installation Instructions
July 23rd, 2008 · No Comments
FRONT INSTALLATION
1. Park the vehicle on a clean, level surface and block the rear wheels for safety.
2. Safely raise the front of vehicle and support with jack stands for safety.
3. Remove the wheels.
4. Measure and record the length of the exposed thread on the torsion bar adjusting bolts for later reference.
DRV__________ PASS__________
5. Remove the torsion bar assembly.
(more…)
05-06 Jeep Grand Cherokee 2″ Spacer Kit
July 20th, 2008 · No Comments
The factory service manual specifically states that striking the knuckle to loosen the ball joints or tie rod ends is prohibited. Striking the aluminum knuckle can damage it. A special puller tool #8677 (or equivalent ball joint tool) is recommended to be used to separate these components from the knuckle.
(more…)
2001-2006 Chevy/GMC 2500 HD 2WD 6″ Suspension System Installation Instructions
July 18th, 2008 · No Comments
FRONT INSTALLATION
1. Park the vehicle on a clean, level surface and block the rear wheels for safety.
2. Safely raise the front of vehicle and support with jack stands for safety.
3. Remove the wheels.
4. Measure and record the length of the exposed thread on the torsion bar adjusting bolts for later reference.
DRV__________ PASS__________
5. Remove the torsion bar assembly.
(more…)
