Automotive Manual PDF

Do not smoke or be near open flame while performing installation. Wear eye protection as the fuel system is under pressure.
Kit includes
• Installation bracket, fuel line disconnect tool, and cable/zip ties.
• EFI multi port fuel injection hose and fuel line quick connect fittings.

Installation Procedure
• Unscrew the gas cap to release residual pressure in the fuel system.
• Locate the fuel RETURN line (smaller of the 2 lines) containing the fuel line quick connect fitting. This connection is located at the rear of the engine near the fire wall on the driver’s side. This kit is designed for mounting location of the driver’s side stud on the master brake cylinder stud.
(more…)

[Read more →]

1 Remove the seat.
2 Lift fuel tank.
3 Unplug connector from ECU (Fig. A).
4 Plug male connector from PCIII into ECU (Fig. B).
5 Plug female connector from PCIII into male connector from original harness (Fig. C).
6 Run PCIII cable under fuel tank and along frame rail to the area under the seat.
7 Mount PCIII unit to rear most area under seat using provided self adhesive velcro (Fig. D).
(more…)

[Read more →]