Congratulations on your purchase of the HONDA 750 AERO Thunder Air Filter Kit. We’re sure you’ll be pleased with the new level of performance you’ll experience. This kit should only be installed on bikes that have been jetted (jet kit not included). We recommend that an experienced mechanic perform this conversion. Use the appropriate Honda service manual for reference to complete jetting of carbs. Remember, gasoline is extremely flammable and can be explosive under certain conditions. Work in a well-ventilated area and clean up any spills immediately. Check for leaks before riding.
(more…)
HONDA 750 AERO Thunder Air Filter Kit Installation Instructions
November 1st, 2009 · No Comments
Honda 750 Ace & Spirit Thunder Air Filter Kit Installation Instructions
October 30th, 2009 · No Comments
Congratulations on your purchase of the Honda 750 Ace & Spirit Thunder Air Filter Kit. We’re sure you’ll be pleased with the new level of performance you’ll experience. This kit should be installed on bikes with After Market Exhaust Pipes only and jetted, (jet kit not included). We recommend that an experienced mechanic perform this conversion. Use the appropriate Honda service manual for reference to complete jetting of carbs. Remember, gasoline is extremely flammable and can be explosive under certain conditions. Work in a well-ventilated area and clean up any spills immediately. Check for leaks before riding.
(more…)
SUZUKI M50 & C50 BOULEVARD THUNDER Air Filter Kit
October 16th, 2008 · No Comments
We’re sure you’ll be pleased with the new level of performance you’ll experience. This kit should be installed on bikes with After Market Exhaust Pipes only and jetted, (not included). We recommend that an experienced mechanic perform this conversion. Use the appropriate Suzuki service manual for reference to complete jetting of carbs. Remember, gasoline is extremely flammable and can be explosive under certain conditions. Work in a well-ventilated area and clean up any spills immediately. Check for leaks before riding.
(more…)
VW TDI Engines Caterpillar 2 Micron Fuel Filter Kit Installation Instruction
August 5th, 2008 · No Comments
1. Install the large o-ring on the threaded nipple on the bottom of the Filter Adapter.
2. Using a little diesel fuel, lubricate the filter gasket and thread the fuel filter onto the filter adapter by hand. Once the filter is on the adapter hand tight tighten the filter one additional complete turn, using a pair of strap wrenches. It is helpful to put a mark on the filter to know when you have complete one full turn.
(more…)
