Yes, it is somewhat simple and assumes that you’re fairly handy with exhaust systems. However, some of us don’t swap exhaust systems every other Saturday, so I’ll try to provide enough details so that most of you can do this (with the right tools, of course). Okay, the first thing you should do is spray each flange bolt with WD-40, Liquid Wrench, or equivalent stuff. Here’s what the OEM piping/flange connections look like after spraying.
(more…)
1997 Honda Civic CX Magnaflow Exhaust System Installation
October 28th, 2009 · No Comments
Split-Type, Heat Pump Air Conditioners Service Manual
June 30th, 2008 · No Comments
Cautions for units utilising refrigerant R410A
In case of using the existing pipes for R22, be careful with the followings.
- Be sure to perform replacement operation before test run.
- Avoid using thin pipes
Make sure that the inside and outside of refrigerant piping is clean and it has no contamination such as sulfur hazardous for use, oxides, dirt, shaving particles, etc. In addition, use pipes with specified thickness.
(more…)
