Automotive Manual PDF

First remove the plastic radiator cover on the front of the engine compartment using a flathead screwdriver and a pry tool. Use a screwdriver to pry the center nail of the push fastener upward about half an inch. The pry tool will then be used to fully remove these four panel pins and free the plastic panel from the body.

Next remove the air temperature sensor from the stock air tube, being careful not to harm the sensor. Set the sensor aside at this time, it will be re-used later.
(more…)

[Read more →]

Tools required:
• ratchet with 10mm, 12mm, & 14mm sockets
• spark plug socket (17mm??)
• 3″ & 9″ extensions for ratchet
• pliers ‐ one regular and one needle nose
• jewelers flathead screwdriver
• can of compressed air or air hose (optional)
• can of carburetor cleaner
• clean rags and newspaper
• one quart size plastic bottle like motor oil or a sturdy piece of wood or simular about that height used to prop up the air intake plenum
• security code (if you have stock radio)
• one tiewrap if you have to cut the one under air intake hose (optional)
(more…)

[Read more →]