Automotive Manual PDF

ON-BOARD PROGRAM GM Pass-Key III (Easily identified by a ‘PK3’ stamped on the blade)
ORIGINATE A NEW KEY:
1. Insert new transponder key and turn ignition to ‘ON’ position. The dashboard security light will turn on and stay on for 10 minutes.
2. Once the security light goes out, you have one minute to to begin Step 3. Turn ignition to ‘OFF’ and then back to ‘ON’ position.
3. Repeat Step 2.
4. Once the dashboard security light has turned off for the third time, the key has been successfully programmed. This is now the only key that is
programmed to the system and all previous electronic key codes have been erased.
(more…)

[Read more →]

In this chapter you will learn how to install the Neo iON in specific vehicles. Acura Before connecting any cables to the black box you must set the dip switch to the Chrysler New / Honda / Acura position. If you set the dip-switches after you have connected cables to the box, you must disconnect and reconnect them for the iON to operate. Audi Make sure you have your radio’s theft protection code before you attempt installation. When you reconnect power to the battery, you will need to enter this code. Information about the theft protection code can be found in your vehicle’s audio operation manual.
(more…)

[Read more →]

Installation Preparation (All Vehicles) Anti-Vibration Setup Load/Unload Magazine CHAPTER Dip-Switch Overview (REQUIRED) Acura Audi Ford (Ford, Lincoln, Mercury) GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) Chrysler (Jeep, Dodge, Plymouth, Eagle) Honda Toyota Volkswagen CHAPTER Troubleshooting Warranty/Warnings FCC and Legal Information Installation Preparation This chapter provides information required for the installation of the Neo Changer, it must be read by all users. Thank you for purchasing the Neo Changer. Since the Neo Changer will works in many different vehicles the following steps must be taken to ensure the changer is set up correctly for the vehicle it is being installed in.
(more…)

[Read more →]

Installation Preparation (All Vehicles) 1 Anti-Vibration Setup 2 Load/Unload Magazine 3 C H A P T E R 2 Dip-Switch Overview (REQUIRED) 5 Acura 6 Audi 7 Ford (Ford, Lincoln, Mercury) 8-9 GM (Buick, Cadillac, Chevy, GMC, Oldsmobile, Pontiac, Saturn) 10-11 Chrysler (Jeep, Dodge, Plymouth, Eagle) 13 Honda 14 Toyota 15 Volkswagen 16 C H A P T E R 3 Troubleshooting 17 Warranty/Warnings 18 FCC and Legal Information 19 Installation Preparation This chapter provides information required for the installation of the Neo Changer, it must be read by all users.
(more…)

[Read more →]