The overdrive cable assembly must be cut to a specified length depending on the vehicle application. The chart at the top displays the correct cable casing lengths for specific Ford vehicles. Length of cable casing (From shoulder of threaded fitting to end of casing.) Allow 5″ of wire beyond trimmed casing The cable casing length is determined by the illustration above. It is recommended to allow an additional 5″ of wire to extend beyond the trimmed cable casing while the handle assembly is completely pushed in.
(more…)
Overdrive Manual Control Cable Assembly
July 27th, 2009 · No Comments
1997-03 Ford F150/F250 L.D.4WD Torsion Key Front Lift/Leveling Kit
June 28th, 2009 · No Comments
Due to the wide on-vehicle adjustment range of this product,a “floating” feature has been designed into the adjustment system. This feature allows the Forged Adjuster & Bolt assembly to reposition in the crossmember as ride height adjustments are made.
Important! Ford/Lincoln vehicles with factory Air Suspension systems require an alternate installation procedure. Only install this product and adjust ride height
(more…)
