Install Galfer Brake lines after HeliBars® are installed. Carefully follow their instructions.
A. Before the factory bars are removed:
1. Carefully loosen the clutch hydraulic line banjo bolt at the clutch master cylinder just enough to rotate the steel banjo fitting forward. (See photo A for positioning). Additional fine adjustments may be required after installation of HeliBars. This modification is necessary for the new bar location / hydraulic line clearance.
(more…)
2004-2008 Honda CBR1000RR Galfer Brake lines Installation Instructions
November 11th, 2009 · No Comments
2004-2007 Ducati ST3/ST4 Heli Bars Installation Instructions
January 22nd, 2009 · No Comments
Heli Bars are designed to safely increase your riding comfort, however it is imperative that these instructions be followed to ensure correct installation. Failure to follow these instructions could result in improper installation and create a dangerous control situation. If you have questions about installation call Heli Modified, Inc. at 1-800-859-4642.
NOTE: Heli Bars for the ST3 and ST4 are designed to utilize the factory bars and replace the stock mounting lugs only. Remove the front brake master cylinder from the right handlebar. It is NOT necessary remove any other controls or grips.
(more…)
