Automotive Manual PDF

Installation
1. Slide two 5/16” dia x 1-1/8” wide U-bolts (C1) over the rear frame cross tubes as shown in figure 1.
2. Place the plow mount (A1) under the vehicle, and slide the legs of the U-bolts through the four rear holes in the plow mount. Terminate the U-bolt legs with 5/16” dia flat washers (C3) and 5/16” dia nylock nuts (C4) as shown in figure 2.
NOTE: Do not tighten the bolt and nut completely. You will do this later in the installation.
3. Slide two 5/16” dia x 1-3/8” wide U-bolts (C2) over the large side frame tubes under the vehicle and through the plow mount (A1)
(more…)

[Read more →]