Automotive Manual PDF

RSS Feed

The Resources for Automotive

BMW 3- & 5-Series Service and Repair Manual Introduction

July 24th, 2010 · No Comments

The E30 3-Series range first became available in the UK in March 1983, and continued in production until April 1991, when the revised E36 3-Series range (not covered by this manual) was introduced. Convertible and Touring (Estate) models were introduced for 1988, and these models have continued in E30 form to date.
The E28 5-Series models were introduced in October 1981, and were superseded in June 1988 by the revised E34 5-Series range, Touring versions of which became available from March 1992. Throughout this manual, E28 models are also referred to as “old-shape”, while E34 models are designated “new-shape”.

[


November 1st, 2008 · No Comments

This tuning manual is designed to take all of the guesswork out of tuning your Commander 950. Holley is dedicated to providing products for our customers that not only outperform your expectations, but also are easy to install and tune.

NOTE: We highly recommend that you carefully read through all the manuals included with your system before installing and tuning your Commander 950 Fuel Injection System. This will eliminate many problem areas and wasted time. This manual covers only the wiring and tuning aspects of the Commander 950. The hardware installation manual (if included) will cover all aspects of the actual installation of the mechanical components (manifold, throttle bodies, etc.).

[

Operation – Magneti Marelli IAW

June 27th, 2008 · No Comments

The Multi-Tester plus/pro software cassette is the component that gives the diagnostic equipment its unique test characteristics: All data required to make the test system operate are stored on the software cassette. The software cassette can be easily replaced enabling the Multi-Tester plus/pro to be rapidly adapted to the trouble-shooting job at hand. These Trouble-Shooting Instructions describe how to use the equipment on Magneti Marelli – Weber fuel injection systems type IAW. Multi-Tester plus/pro checks all input and output signals that have bearing on the control system and can also diagnose a faulty control unit.

[