Automotive Manual PDF

STEP I ASSEMBLY INSTRUCTIONS – Fuel Pump / Carburetor / Manifold
A) Install fuel pump on carburetor, using shortest fuel line hose (1 ū” long) and two small diameter clamps. Ensure that you connect the correct nipple from the fuel pump to the carburetor. (Refer to Fig. 3)
B) Install carburetor and fuel pump assembly on the intake manifold, along with gaskets, insulation block, lock washers and nuts supplied in kit. (Refer to Fig. 2) Tighten nuts to 8 – 12 foot lbs. torque.
C) Attach one end of 7″ fuel line to the pulse tube on the intake manifold. Slide two small diameter clamps over the fuel line and then attach the other end of the line to the crankcase fitting on fuel pump. (Refer to Fig 3.) Position clamps at each end of hose and tighten securely. Proceed to STEP II.
(more…)

[Read more →]