Automotive Manual PDF

Do not smoke or be near open flame while performing installation. Wear eye protection as the fuel system is under pressure.
Kit Includes
Installation bracket/s, cable ties EFI multi port fuel injection hose with Male/Female quick connect fittings (Not included – Ford Fuel Line disconnect tool No. 7336 – available at your local Ford Dealer or see page 3 of the installation instructions)
(more…)

[Read more →]

Step 1- Determine the Correct Fuel Line Adapter
This section aids in determining the best fuel line adapter in your kit to use to maintain fuel supply for the E3 Fuel Saver 7000.
IMPORTANT
If you have Electronic Fuel Injection (EFI) system with a high pressure fuel line with a “Schrader valve fuel stem” proceed to the section entitled “INSTALLING THE SCHRADER VALVE CONNECTORS” shown on the next page. If you have a Schrader Valve Stem, you will need the correct Schrader adapter (either FORD or UNIVERSAL Schrader adapter). These adapters are included in your kit. If your engine is NOT EQUIPPED with a high pressure fuel rail Schrader valve stem, then proceed to the section “INSTALLING THE GASOLINE SUPPLY MODULE.”
(more…)

[Read more →]

Locate fuel supply line coming from tank on the drivers’ side frame rail. There are 2 steel lines, the top line (smaller of the 2 lines) is for fuel return to the tank, the bottom line is the fuel supply line (see Figure 1) and is the larger of the 2 lines.
STEP 1:
Cut and remove a section of the fuel supply line; approximately 6 inches will be enough. Use a flaring tool on both ends; this will help keep the fuel hose on the line.
(more…)

[Read more →]

The MotorVac CarbonClean System is a self-contained cleaning system, designed to connect to any gasoline engine. Once the unit is connected, it temporarily replaces the regular fuel supply with a mixture of gasoline and the specially formulated MotorVac CarbonClean Detergent and Top Engine Cleaner.
(more…)

[Read more →]

The Volkswagen Passat Service Manual: 1998-2004 covers Passat models built on the “B5″ platform. With new 2003 and 2004 model year information and new coverage of the 6-speed manual transmission (transmission code: 01E), this manual supersedes Volkswagen Passat Service Manual: 1998-2002 (VP02). The Volkswagen Passat Service Manual: 1998-2004 has been prepared using selected factory service information with the added benefit of suggestions, tips and clarification of various procedures. If you’re looking for better understanding of your Volkswagen Passat look no further than Bentley Publishers.
(more…)

[Read more →]