Automotive Manual PDF

This installation manual covers the installation of all Hondata stages. Some information in this manual will not apply if you are not installing all the Hondata features.
Shift light
This is a high intensity LED wired in parallel with the factory check engine light. At a certain rpm the LED will light as an indication of when you should change gear. The shift light rpm can be set with a dash mounted push button.
(more…)

[Read more →]

DO NOT try to run the vehicle at full throttle at sea level altitude with a supercharger unless the fuel tank is filled with good 91-octane fuel. Failure to heed this warning can result in severe engine damage. Special Note: If you do not have a factory workshop manual, buy one now! It is good to have for any repairs now and in the future. The factory manual is available from Helm Publications, 800-782-4356. Tools Needed: 8, 10, 11 (7/16”), 12, 13 (1/2”), 14 (9/16”), 15, 17, sockets and wrenches, a 5mm Allen wrench, Phillips and straight blade screwdrivers, and a telescoping magnet.
(more…)

[Read more →]

The First 1000 Miles (1500 km) The more cautiously you treat your vehicle during the break-in period, the more satisfied you will be with its performance later on. Therefore, drive your vehicle during the first 1500 km (1000 miles) at moderate vehicle and engine-speeds. During this period, avoid heavy loads (full throttle driving) and high RPM (no more than 2/3 of maximum permissible speed in each gear as indicated on the speedometer). Avoid accelerating by kickdown. It is not recommended to brake the vehicle by manually shifting to a lower gear.
(more…)

[Read more →]