The front control arm mounting pockets must be trimmed slightly to install the front crossmember (0 902). Make a cut mark along the front lower bottom edge of the pocket to be flush to the control arm mounting surface. Also, make a mark in line with the inside lower edge to remove the rounded corner from the lower plate (Fig 22). Cut the marked area of the control arm pocket and paint any bare metal to prevent corrosion.
(more…)
2005-2006 Jeep Grand Cherokee/Commander 4″ Suspension System
July 26th, 2008 · No Comments
05-06 Jeep Grand Cherokee 2″ Spacer Kit
July 20th, 2008 · No Comments
The factory service manual specifically states that striking the knuckle to loosen the ball joints or tie rod ends is prohibited. Striking the aluminum knuckle can damage it. A special puller tool #8677 (or equivalent ball joint tool) is recommended to be used to separate these components from the knuckle.
(more…)
JBS Technologies Installation Guide - Owners Guide Manual
March 26th, 2008 · No Comments
Manufacturer Make/ Year Anti-theft PONITAC BONNIEVILLE 89+ VATS FIREBIRD 88+ VATS GRAND AM 96-98 PASSLOCK 1 GRAND AM 99+ PASSLOCK 2 GRAND PRIX 92-96 VATS MONTANA 99+ TRANSPONDER SUNFIRE 96-99 PASSLOCK 1 SUNFIRE 2000+ PASSLOCK 2 PORSCHE ALL 97+ TRANSPONDER SAAB ALL 97+ TRANSPONDER SATURN ALL 97+ FACTORY 2000+ TRANSPONDER TOYOTA AVALON 98+ TRANSPONDER CAMRY 98+ TRANSPONDER LAND CRUISER 98+ TRANSPONDER SOLARIA 99+ TRANSPONDER SUPRA 98+ TRANSPONDER VOLKSWAGON BEETLE 98+ TRANSPONDER GOLF 98+ TRANSPONDER PASSAT 98+ TRANSPONDER VOLVO ALL 98+ TRANSPONDER | Manufacturer Make/ Year Anti-theft
(more…)
