The Nemesis uses both of the original multi-pin connectors to link with your bike wiring loom, no changes are necessary, but remember it is VITALLY important to re-connect the 6mm ground connector. Nemesis also re-uses the cast aluminium ‘heat sink’ from the IAW 5.9 ECU, this can be removed and re-fitted to Nemesis using a TORX T20 screwdriver without any damage to the original ECU.
(more…)
Nemesis Engine Control for Ducati
February 5th, 2009 · No Comments
AM/FM Reception Problems
September 5th, 2008 · No Comments
Almost every reception problem is caused by one of two things: a bad ground on the antenna, or a bad antenna cable running from the antenna to the radio.
There are (2) parts to an antenna and you have to understand the antenna cable itself. Antenna cables are coaxial style cables. Coax cables have a thin center conductor wire at the center of the cable and an outer metal braid just under the plastic jacket of the cable. The center conductor carries the signal and the outer shield serves two purposes, it shields the inner conductor from radiated noises and acts as the negative voltage path. 99% of antenna reception problems can be traced to either one of these two parts of the antenna cable.
(more…)
